| A
wide range of AC and DC powering options allow
the operator to run the light and battery charger
from almost any power source.
MBP-5200 Series Charger: This
charger can quickly recharge all NiCad, NiMH,
and Li-Ion Batteries from any 100-240V AC or
11-36V DC Power Source. The Horizontal or Vertical
Mounting Option allows the MBP-5200 Charger
to mount horizontally or vertically on any
flat surface.
 |
 |
| The MBP-5200
Charger with Horizontal Mount Options has
side brackets for secure mounting to any
flat surface such as the top of a vehicle
dashboard. |
MBP-5600 Series Charger: This
charger can do everything the 5200 Series Chargers
can do with the added feature of being able
to directly power the light from any 100-240V
AC or 11-36V DC Power Source
MBA-7100 Vehicle Adaptor: This
adaptor plugs into the cigarette lighter socket
of vehicles with 12V systems. The adaptor’s
coiled cord plugs into the searchlight’s
power cord, allowing you to directly power the
searchlight from the vehicle
MBA-7200 12V Power Connector:
Designed for hard-wire installation in the dash
of a vehicle or boat with a 12V system, this
connector also comes with a weatherproof cap.
The Maxa Beam can then be plugged
into the connector with a standard power cord.
MBA-7310 10’ Coil
Power Cord with 12V Perko Plug: Design for use
on boats with 12V power, this cord plugs into
the Maxa Beam and has a 12V Perko connector (model
#181867) attached to the other end.
MBP-4024-S 24V
to 12V DC Direct Drive Converter: This unit converts
18-36V power to the required 12V DC needed to
power the searchlight. It can quickly be attached
to or detached from the bottom of
the searchlight (designed like the battery case).
Input and output cords are sold separately.
MBP-4000S AC
Direct Drive Power Supply: This unit converts
100-240V AC to the required 12V DC needed the
power the searchlight so that you can directly
power the light from an AC source.
CLICK
HERE to find the model number for the Smart
Charger with the style and powering adapters
you need. |
